Inputs on hammond antique grandfather clocks
* A longcase clock must be set up on a horizontal surface. This seems to be very basic but it is critical for its functioning.
When adjusting it to stand besides the wall you may find out that the carpet or other covering is uneven. Or it may be that the flooring lacks evenness towards the wall.
If the case tends to tilt in any direction it is critical to get it standing vertically.
* Pendulums have a distinguishable front side. The front of the pendulum is usually the the flat side.
The longcase clock pendulum remain without touching any side of the case. Should it touch the case it could be that the clock tower lists.
* The arrangement of weights that are the clocks power supply should stand clear of the pendulum and walls. They should impact upon the pendulum or the sides of the clock casing when they drop.
* When you set the pendulum in motion check for a constant ticking sound. It should be stable and regular.
If it is not even that could be because there are problems with the surface on which the clock stands. Try to level the surface and readjust as required.
* When you set the time avoid shifting your clocks hands backwards more than just a few minutes. Dont ever turn the clock hands rearwards past the number twelve.
It is ok to run the hands forward. When moving past the mid day mark hold on until the clock has finished striking the hour before going on.
* If your clock runs too fast or too slow vary the pendulums length.
Add to the length to lessen the speed of the clock. Trim back the pendulum length to to quicken the clock.
If you have problems in setting up the antique longcase clock get your dealer to assist you. Bask In the aura of style your longcase clock adds to your living room!
You can get access to a lucrative freelance career for as little as $2.95. Click here for more info and to start immediately
Check out the world-renowned planners and tools for productivity from FranklinCovey. Go to FranklinCovey now.
| Grandfather clocks - Home
|
History of the pendulum clock How grandfather clocks work | Setting up a grandfather clock |
|
Warning: require_once(/home/san2bd7/public_html/timemanagementfacts/carp/carp.php) [function.require-once]: failed to open stream: No such file or directory in /home/san2bd7/public_html/grandfatherclocks/clocks/hammond-antique-grandfather-clocks.html on line 62 Fatal error: require_once() [function.require]: Failed opening required '/home/san2bd7/public_html/timemanagementfacts/carp/carp.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/san2bd7/public_html/grandfatherclocks/clocks/hammond-antique-grandfather-clocks.html on line 62 |